Journal Articles
JOURNAL ARTICLES
- Oluwasola K. Arigbabowo, Jitendra S. Tate, and Wilhelmus J Geerts, “High-performance Thermoplastic-based Magnetic Composites”, SAMPE Journal, May-June 2024, Issue No. 60, Vol. 3, pp 8-18, DOI: 10.33599/SJ.v60no3.01 https://www.nasampe.org/store/viewproduct.aspx?id=23835765
- Harish Kallagunta and Jitendra S. Tate, “Mechanical Behavior of Glass Fiber Reinforced Polyester Composites Modified with Silane Treated Alumina Nanofibers Subjected to Low-Velocity Impact”, accepted to International Journal of Composites and Constituent Materials, STM Journals, Volume 9, Issue 2, 2023. Journal DOI no.: 10.37628/IJCCM, eISSN: 2456-5237 Online in xxxxx 2024 https://materials.journalspub.info/index.php?journal=JCCM&page=issue&op=view&path%5B%5D=236
- Harish Kallagunta and Jitendra Tate, “Mechanical Characterization of Glass Fiber Reinforced Polyester Composites Modified with Silane Treated Alumina Nanofibers”, Nanotrends- A Journal of Nano technology and Its Applications, April 2023. Vol 25, No 1 (2023) (stmjournals.in), pp 1-19
https://techjournals.stmjournals.in/index.php/NTs/issue/view/257 .
4.Jitendra S. Tate, Musa I Mannan, Saif AA Taqy, and Subash Panta, “Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites”, International Journal of Composites and Constituent Materials, STM Journals,. http://materials.journalspub.info/index.php?journal=JCCM&page=index, ISSN: 2456-5237, Volume 8, Issue 2, 2022, pp 13-31 Journal DOI no.: 10.37628/IJCCM, eISSN: 2456-5237
Online in April 2023 https://materials.journalspub.info/index.php?journal=JCCM&page=issue&op=view&path%5B%5D=220
5.Jitendra S. Tate, Oluwasola K. Arigbabowo, and Liam Omer, “Fused Filament Fabrication of Polyamide 6 Nanographene Composite for Electrostatic Discharge Applications”, Journal of Materials Science and Engineering B, 287 (2023)116086, https://doi.org/10.1016/j.mseb.2022.116086 Published Online November 1, 2022. Featured at Advances in Engineering, https://advanceseng.com/fused-filament-fabrication-polyamide-6-nanographene-composite-electrostatic-discharge-applications/
6. Tanjina N. Ahmed, Camila Belduque, Maggie Y. Chen, Jitendra S. Tate, and Wilhelmus J. Geerts, “Dynamic Viscosity of Strontium Ferrite-Nylon Composite Below the Melting Temperature”, published online 9/29/22, AIP Advances 12, 095223 (2022);
(Vol.12, Issue 9), https://doi.org/10.1063/5.0098972 DOI: 10.1063/5.0098972
7. Sagar Navle, Jitendra Tate, and Harish Kallagunta, “Feasibility Study of Thermoplastic Nanocomposites for ESD Applications Using Additive Manufacturing.” Nanotrends - A Journal of Nanotechnology & its Applications, STM Journals, Vol.24, Issue 1, pp 46-55, published May 2022, Journal DOI no.: 10.37591/NTs , SJIF: 6.17 https://techjournals.stmjournals.in/index.php/NTs/article/view/1217
8.Harish Kallagunta and Jitendra Tate, “Influence of Surface Functionalization of Ceramic Nanofibers on Morphological, Physical and Mechanical Properties of Unsaturated Polyester Nanocomposites”, Composites and Advanced Materials, Sage Journals, 04/14/2022, DOI: https://doi.org/10.1177/26349833221087 https://journals.sagepub.com/doi/abs/10.1177%2F26349833221087275, Impact Factor: 0.852
9.Henderson, L., Zamora, S., Ahmed, T. N., Belduque Correa, M. C., Tate, J. S., Chen,
Y., & Geerts, W. J. (2021). Altering Magnetic Properties of Iron Filament PLA
Using Magnetic Field Assisted Additive Manufacturing (MFAAM). Journal of
Magnetism and Magnetic Materials, Vol 538, 15 Nov 2021, 168320. Published DOI: https://doi.org/10.1016/j.jmmm.2021.168320
10.Ryan M. McDermott, Jitendra S. Tate, and Joe Koo, “'Exploration of a New Affordable Thermal Protection System Utilizing 2.5D Silica/Polysiloxane Composite'”, J of Composite Materials, Sage Journals, published December 2021. DOI: https://doi.org/10.1177/00219983211038622 , Impact Factor: 2.591 https://doi.org/10.1177/00219983211038622
11. Jitendra S. Tate and Oluwasola K. Arigbabowo, “Additive Manufacturing of Polyamide Nanocomposites for Electrostatic Charge Dissipation Applications”, Journal of Materials Science and Engineering B, published June 2021.
DOI: https://doi.org/10.1016/j.mseb.2021.115251
12.Jitendra. S. Tate , Harish Kallagunta, and Andrew Alvarez, “Flammability and Mechanical Performance of MWCNT Incorporated Cyanate Ester/Carbon Fiber Composites”, Journal of Polymer Materials-An International Journal, Vol. 38, No. 1-2 Comb. (Jan-Jun 2021), pp101-120 Ref# JPM-D20-017RER, accepted 04/26/2021, published February 2022 DOI : DOI : https://doi.org/10.32381/JPM.2021.38.1-2.9
13.Harish Kallagunta and Jitendra S. Tate, “Low Velocity Impact Behavior of Glass Fiber Epoxy Composites Modified with Nanoceramic Particles”, Accepted to the Journal of Composite Materials, Sage Publications, December 10, 2019. https://doi.org/10.1177/0021998319893435.
14.J. S. Tate, Dinesh Kumar Kannabiran Vasudevan, Vasconcellos Murphy Shelby E., Kunal Kumar, Stephan Sprenger, “Effect of CTBN Micro-Rubber Particles on Fatigue Performance of Carbon Fiber Reinforced Epoxy Composites”, Nano Trends: A Journal of Nanotechnology and Its Applications, Vol 20, No. 2 (2018). http://techjournals.stmjournals.in/index.php/NTs/issue/view/24 15.Harishsaiprasad Kallagunta and Jitendra S Tate, “Damage Mechanisms in Multiwall Carbon Nanotube-based Carbon Fiber Reinforced Composites under Ballistic Impact Loading”, Nano Trends: A Journal of Nanotechnology and Its Applications, Vol 20, No. 2 (2018). http://techjournals.stmjournals.in/index.php/NTs/issue/view/24
16.Jitendra S. Tate, Adekunle T. Akinola, Sergio Espinoza, Swapnil Gaikwad, Dinesh Kumar Kannabiran Vasudevan, Stephen Sprenger and Kunal Kumar, “Tension-tension fatigue performance and stiffness degradation of nanosilica modified glass fiber reinforced composites”, Journal of Composites Materials, Sage Publications, May 2017, https://doi.org/10.1177/0021998317714855
17.Tate, J. , Hernandez, R.A., Hanks, C., Trybula, W., & Fazarro, D (2016). “Addressing ethical and safety issues of nanotechnology in health and medicine in undergraduate engineering and technology curriculum”, Global Journal of Engineering Education, 18 (1), pp 30-34.
http://www.wiete.com.au/journals/GJEE/Publish/vol18no1/04-Tate-J.S.pdf
18.D. Fazarro, C. Hanks, J. Tate, and W. Trybula, and (2016). “Introducing Engineering And Technology Majors To Nano-Safety And Ethics”, TheTechnology Interface International Journal (TIIJ). Volume 17, Number 1, Fall/Winter 2016, pp 5-17. http://tiij.org/issues/issues/fall2016/fall_winter_2016.htm
19.J. Tate, S. Espinoza, D. Habbit, C. Hanks, W. Trybula, and D. Fazarro, "Military and National Security Implications of Nanotechnology", Journal of Technology Studies, Issue 1, Volume XLI, Spring 2015. http://scholar.lib.vt.edu/ejournals/JOTS/
20.D. Fazarro, J. Tate, W. Trybula, C. Hanks, R. McLean, S. Dutta, and A. Mokhtari, “Evaluating Students’ Perceptions for the Ethics Module Content in Nanotechnology Safety: Meeting the Needs for Post-Secondary Students in STEM Areas”, Journal of Technology, Management, and Applied Engineering, vol. 31, no. 1, Jan-March 2015.
21.R. K. Pandey, W. A. Stapleton, J. S. Tate, A. K. Bandyopadhyay, I. Sutanto, S. Sprissler and S. Lin. “Applications of CCTO supercapacitor in energy storage and electronics” AIP Advances, 25 vol.3, issue 6. http://link.aip.org/link/?ADV/3/062126&aemail=author, June 2013,
DOI: 10.1063/1.4812709
22.J. S. Tate, S.Gaikwad, N. Theodoropoulou, E. Trevino, and J. H. Koo, “Carbon/phenolic nanocomposites as advanced thermal protection material in aerospace applications”, Journal of Composites, Hindwai Publications, vol. 2013, Article ID 403656, 9 pages, June 2013. doi:10.1155/2013/403656. http://www.hindawi.com/journals/composites/contents/
23.J Koo, M. Natali, J. Tate, and E. Allcorn, “Polymer Nanocomposites as Advanced Ablatives – A Comprehensive Review,” International Journal of Energetic Materials and Chemical Propulsion, 12 (2), (2013), 119-162.
24.J.S. Tate, Esmer Trevino, Swapnil Gaikwad, Stephen Sprenger, Isidro Rosas, and Matt Andrews, “Low-velocity impact studies on glass reinforced composites using rubber micro-particles and silica nano-particles modified epoxy resin”, Journal of Nanoscience, Nanoengineering, and Applications, vol. 3, issue 1, ISSN: 2231-1777, January 2013.
25.S.Gaikwad, J. S. Tate, N. Theodoropoulou, and J. H. Koo , “Electrical And Mechanical Properties Of PA11 Blended With Nanographene Platelets Using Industrial Twin Screw Extruder For Selective Laser Sintering”, Journal of Composites Materials, vol. 47, issue 23, pp. 2973-2986, October 2013, Available online September 2012.
http://jcm.sagepub.com/content/early/2012/09/25/0021998312460560.full.pdf+html
26.J.S. Tate, S. Gaikwad, C. J. Jacobs, W. Stapleton, N. Theodoropoulou, and J. H. Koo, “PA11 Blended With Nanographene Platelets Using Sonication For ESD Applications” ,Nanotrends - A Journal of Nanotechnology & its Applications, vol. 13, Issue 1, pp. 18-31, August 2012.
27.C. Jacobs, J. S. Tate, B. Olson, N. Theodoropoulou, and J. Koo, “Thermal characterization of nylon 11 / nanographene platelet nanocomposites” ,Journal of Nanoscience and Nanotechnology, American Scientific Publishers, vol. 12, no. 3, pp. 1799–1805(7), March 2012
28.D. Kabakov, J. S. Tate, and J. Koo, “Effect of dispersion techniques on flammability and mechanical properties of phenolic/E-glass nanocomposites”, Journal of Fire Science, Sage Publications, vol. 29, no. 5, pp. 387-402, September 2011.
29.J. S. Tate, D. Kabakov, and J.Koo, “Carbon/phenolic nanocomposites for ablative applications”, SAMPE Journal, vol. 47, no. 3, pp. 36-43, May/June 2011.
30.J. S. Tate, A. T. Akinola, and D. Kabakov, “Biobased nanocomposites: an alternative to traditional composites”, Journal of Technology Studies, vol. XXXV, no. 1, pp. 25-32, 2009.
31.J. S. Tate, A. D. Kelkar, and V. A. Kelkar, “Minimizing scatter in load-controlled fatigue test data of textile polymeric composites using statistical techniques”, Journal of Interdisciplinary Mathematics, vol. 12, no. 2, pp. 283-292, 2009.
32.J. S. Tate and A.D. Kelkar, “Stiffness degradation modeling of biaxial braided composites”, Composites Part B: Engineering, vol. 39, no. 3, pp. 548-555, 2008.
33.J. S. Tate and V. Sriraman, “Developing research aptitude in senior year manufacturing engineering students”, UICEE’s World Transactions on Engineering and Technology Education, vol. 6, no.2, pp. 267-70, 2007.
34.J. S. Tate and V. Sriraman, “Project based approach to teaching of ‘computer aided engineering’ to a multidisciplinary student population”, UICEE’s World Transactions on Engineering and Technology Education, vol. 6, no. 1, pp. 71-74, 2007.
35.X. Tang, J. Whitcomb, A. D. Kelkar, and J. S. Tate, “Progressive failure analysis of 2x2 braided composites exhibiting multiscale heterogeneity”, Composites Science and Technology, vol. 66, issue 14, pp. 2580-2590, 2006.
36.J. S. Tate A. D. Kelkar, and J. D. Whitcomb, “Effect of braid angle on fatigue performance of biaxial braided composites”,International Journal of Fatigue, vol.28, issue 10, pp. 1239-124, 2006.
37.A. D. Kelkar, J. S. Tate, and R. Bolick, “Structural integrity of aerosapce textile composites under fatigue loading”, Materials Science and Engineering: B, vol. 132, issues 1-2, pp. 79-84, 2006.
38.A. D. Kelkar, J. S. Tate, and P. Chaphalkar, “Performance evaluation of VARTM manufactured textile composites for aerospace and defense applications”, Materials Science and Engineering: B, vol. 132, issues 1-2, pp. 126-128, 2006.
39.A. D. Kelkar and J. S. Tate, “Low cost manufacturing of textile composite using VARTM process”, International Journal of Manufacturing Technology and Research, vol. 1, 2004.