Skip to Content
School of Engineering
Advanced Composites Laboratory

Presentations Only

Presentations Only

  1. Mandesh Khadka,  Ir. Wilhemus J. Geerts, and Jitendra S. Tate, “Mechanical properties of polymer-bonded magnets fabricated using Magnetic Field Assisted Additive Manufacturing (MFAAM)”, The Thirty-Fourth Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, August 14-16, 2023, Austin, Texas USA.
  2. Espinoza Rodriguez, G. (corresponding author), Arigbabowo, O. (co-author), Alvarado, J. (co-author), Tate, J. S. (co-author), Geerts, W. J. (co-author), MMM 2023 conference, "Crystal Anisotropy of Strontium Ferrite and PA-12 Fused Filament Fabrication (FFF)," MMM-2023, Hyat Regency Dallas, Dallas, TX, United States. (November 3, 2023).
  3. Arigbabowo, O. (corresponding author), Khadka, M. (co-author), Tate, J. S. (co-author), Geerts, W. J. (co-author), MMM 2023 conference, "The Magnetic Anisotropy of Field-Assisted 3D-printed Nylon Strontium Ferrite Composites," MMM, Hyat Regency Dallas, Dallas, TX, United States. (November 3, 2023).
  4. Tanjina N. Ahmed, Christopher Selsor, Jitendra S. Tate, Wilhelmus J. Geerts, “Magnetic
    Behavior and Chaining of Strontium Ferrite-Nylon Composite Above the Melting
    Temperature”, oral presentation, 2022-MMM conference, Minneapolis, MN October 31-
    November 4, 2022.
  5. Henderson, L. (corresponding author), Ahmed, T. N. (author), Belduque, M. C uthor), Tate, J. S. (author), Chen, Y. (. (author), Geerts, W. J., national APS

March Meeting, "Altering Magnetic Properties of Iron Filament PLA Using

Magnetic Field Assisted Additive Manufacturing," APS, virtual, College Park,

MD, United States. (March 18, 2021).

  1. Ahmed, T. N. (corresponding author), Belduque, M. C. (author), Tate, J. S. (author),

Geerts, W. J., national APS March meeting 2021, "Magnetic Anisotropy and

Torque Analysis of Strontium Ferrite/PA12 composite filament and 3D printed

sample under a magnetic field," APS, College Park, United States. (March 18,

2021).

 3. Luna, D. (Corresponding Author), Belduque Correa, M. C. (Author), Thramann, H.

(Author), Panta, S. (Author), Omer, L. (Author), Ahmed, T. (Author), Tate, J.

(Author), Geerts, W. J. (Author), 2021-Fall TSAPS Meeting, "Magnetic 3D

Printing Filament Development and Printing Methods," TSAPS, University of

Houston, Clear Lake, Houston, TX, United States. (October 21, 2021).

4.Ahmed, T. (corresponding author), Henderson, L. (author), Belduque Correa, M. C.

(author), Chen, M. Y. (Author), Tate, J. S. (author), Geerts, W. J. (author),

International Polyolefins Conference, "Magnetic Field Assisted Additive

Manufacturing (MFAAM) of magnetic polymer composite filaments," SPE South

           Texas Section, virtual. (February 23, 2021).

  1. Kolton Dieckow, Chandan Howlader, Tanjina Ahmed, Maria Camila Belduque, Jitendra Tate, Wilhelmus Geerts, “Effect of Field Orientation and Infill Percentage on the VSM calibration factor of FFM 3D printed samples”, MMM 2020 conference, oral presentation, Palm Beach Florida, November 2-6-2020.
  2. Lauren Henderson, Tanjina N. Ahmed, Camila Belduque, Jitendra Tate, Maggie Chen, Wilhelmus J. Geerts, Altering Magnetic Properties of Iron Filament PLA Using Magnetic Field Assisted Additive Manufacturing, TSAPS Fall-2020 meeting UT Arlington, oral presentation.
  3. Lauren Henderson, Tanjina N. Ahmed, Camila Belduque, Jitendra Tate, Maggie Chen, Wilhelmus J. Geerts, Altering Magnetic Properties of Iron Filament PLA Using Magnetic Field Assisted Additive Manufacturing, TSAPS Fall-2020 meeting UT Arlington, oral presentation.
  4. Tanjina Nasreen Ahmed, Maria Camila Belduque, Jitendra S. Tate, Wilhelmus J. Geerts, “Magnetic Anisotropy and Torque Analysis of Strontium Ferrite/PA12 composite filament and 3D printed sample under a magnetic field”, accepted for APS March-2021 meeting, March 15-19, 2021
  5. Tanjina Ahmed, Binod D.C., Maria Camila Belduque, Jitendra Tate, Wilhelmus Geerts, “Time Dependence of Magnetic Moment of Strontium-Ferrite powder measured by biaxial VSM”, MMM-2020 conference, November 2 through 6 2020, Palm Beach Florida
  6. Sagar V Navle, Jitendra S Tate, John M Slupsky, and Bahram Asiabanpour, “Comparison of mechanical and electrical properties of PA11/NGP nanocomposites and conductive metal filled PLA composites using fused deposition modeling", SFF 2017, Annual International Solid Freeform Fabrication Symposium, August 7-9, 2017, Austin, TX
  7. W. Trybula, J. Tate, C. Hanks, and D. Fazarro, "Nanotechnology Safety Education", National

Science and Engineering Education Workshop (NSEE), May 7, 2015.

  1. E. Botello, J. Tate, N. Theodoropoulou, “Bringing Research Experiences for Physics Teachers back into the Classroom” American Association of Physics Teachers (AAPT) Winter Meeting, San Diego, CA, January 3-6, 2015.
  2. D. Fazarro, J. Tate, W. Trybula, C. Hanks, S. Dutta, and R. McLean “We Are Seed Planters: A Look at Teaching Students Nanotechnology Environment, Health, and Safety Awareness”, The Association of Technology, Management and Applied Engineering (ATMAE) Annual Conference, St. Louis, MO, November 19-21, 2014 
  3. D. Fazarro, J. Tate, W. Trybula, C. Hanks, S. Dutta, and R. McLean. “Preparing the Nano Workforce: At Look at Educating Undergraduate Students in Nano-Safety”, Micro Nano Technology Conference, June 4-6, 2014, Albuquerque, NM